About the Ansonia “Fisher” Clock
Title: Ansonia “Fisher” Clock Model: A Collector’s Delight
The Ansonia “Fisher” clock model, produced between 1895 and 1916, is a coveted mantel clock that graced many Victorian-era homes. This exquisite timepiece is named after its distinctive fish-shaped pendulum bob, which adds an element of novelty to the otherwise elegant design.
Characterized by its intricate case crafted from mahogany or walnut, the “Fisher” clock showcases a level of artistry that mirrors the opulence of the era. The case features ornate carvings and a brass-trimmed dial, contributing to its grandeur. The dial is adorned with Roman numerals, a minute track, and an Ansonia logo, further enhancing its antique charm.
What sets the “Fisher” clock apart from other models is its unique design and exceptional craftsmanship. Its fish-shaped pendulum bob, suspended in a glass-enclosed compartment, is a captivating feature that continues to attract collectors today. Additionally, the 8-day movement with a strike on the hour provides accurate timekeeping, making it both functional and decorative.
Notable features of the “Fisher” clock include its rare variations such as those with mother-of-pearl inlays or different finishes like silvered bronze. These versions, while less common, command higher prices among collectors due to their rarity and beauty. Overall, the Ansonia “Fisher” clock model is a must-have for any serious antique clock collector, offering both historical significance and aesthetic appeal.
Auction Records and Price History
The following 14 auction record(s) show actual sale prices for the Ansonia “Fisher” model clock. Prices vary based on condition, originality, and current market demand. Search for more records on AntiqueClocksPriceGuide.com.
Ansonia ” FISHER” , circa 1880’s
Large figural clock at 19″ to top of her hand. Case: Cast figural with some of the original finish remaining. Works: Ansonia 8 day time and strike with open escapement. Reference: Ansonia Clocks by Tran Duy Ly Condition: Case: In need of restoration, top or spear missing. Works: Needs cleaning, no pendulum.
Retail: $550 | Date: 3/15/2000 | Source: AntiqueClocks.com
Ansonia Clock Co. New York, C.1880, “FISHER” canister swing clock (3″ dial), on early shallow base. Note cast figure hold the clock arm aloft, and the entire arm swings without apparent impulse.
some of the gilding on top support and trim remains, most worn to brass, bob still gilt. The vertical rods are coated with a film of corrosion, as this clock lived near the ocean. Patina on statue and base are good. Very good original paper dial. Ht 24.5″
Sold: $1,725 | Date: 5/15/2010 | Source: R. O. Schmitt Fine Arts
Ansonia Clock Co. New York, C.1896, “FISHER” canister swing clock (3″ dial), on deep iron base. Note cast figure hold the clock arm aloft, and the entire arm swings without apparent impulse.
once gilt trim on canister and pendulum is worn to brass and oxidized. The nickel plated rods have turned gray with tarnish. Patina on statue is good. Excellent original paper dial. Ht 25.5″
Sold: $1,840 | Date: 5/15/2010 | Source: R. O. Schmitt Fine Arts
Ansonia Clock Co. New York, C.1890, “FISHER”, (male) swinging arm timepiece, 8-day, the movement contained within the canister, commonly called “tin can” arm.
this is a large dial (4″) arm, in good original condition, however there is corrosion on the rods. The statue also retains original finish, well worn, with base metal showing through about 30%. Overall a good example of an earlier swinger. Ht 24.5″
Sold: $1,150 | Date: 5/15/2010 | Source: R. O. Schmitt Fine Arts
Ansonia Clock Co. New York, C.1895, “FISHER” {woman}, swinging arm timepiece, 8-day, the movement contained within the ball at top, the entire arm swinging without apparent impulse. Note the Fisher has her right arm up to support the ball, while the Huntress has her left arm raised. This is correct.
The ball appears to have had a polished nickel finish, now oxidized and with mild pitting. An old overcoating has turned a pale blue. Some oxidation on rods. The statue was repainted maybe 25 years ago, a brown color, and gold Rub’n’buff applied to edges and raised areas. Ht 25″
Sold: $1,380 | Date: 5/15/2010 | Source: R. O. Schmitt Fine Arts
Ansonia “Fisher” Ball Swing Clock
With an old 8 day, TO, tin can, set key wind movement; a marked dial and the original finish. (The clock does not wind.) 22 1/2″ Tall
Sold: $1,400 | Date: Feb 01, 2014 | Source: Tom Harris
Ansonia Clock Company swing clock, “Fisher”, ca 1883.
Total height as pictured is 25 inches, arm alone is 23 inches. Minor wear on the rods, balls restored several years ago, good patina on the statue, repaired where the bracket fits into her hand, you most always see repairs there. The 8- day time only movement is a reproduction of the original. These movements can be bought from Timesavers. If all original, this clock would be worth $2500 to $3000. You can get this swinger a whole lot cheaper, and enjoy it while you look for an original movement. I have seen them sell on EBay. Ly-Ansonia, swing clock section.
Sold: $0 unsold | Date: January, 2005 | Source: Horton’s Antique Clocks
Ansonia Clock Co. Swing Clock, “Fisher”, C. 1883.
Good original clock with nice patina on the statue. There is no fish “stringer” in her left hand going down to the fish, as shown in catalog pictures. I don’t know if I have ever seen a stringer. Swing arm is 23″, very good overall, some wear on rods, balls restored years ago. 8 day movement is in good running condition. Total height 25″. The minimum is very modest at $2000, we see these bringing $3000 and more at some auctions. Ly-Ansonia, swing clock section.
Sold: $2,222 | Date: July, 2004 | Source: Horton’s Antique Clocks
Ansonia Clock Co., New York, NY, ÒFisherÓ swing clock with a spring driven, 8 days, timepiece movement, c1880.
The statue retains its original black enamel base and gray patina on the figurine. The dial, hands and beveled glass are in very nice original condition. The swinging arm is also in nice original condition. See Tran Duy LyÕs Ansonia Clocks and Watches book, p703. Ht 22 3/4Ò.
Sold: $1,300 | Date: May 16, 2015 | Source: R. O. Schmitt Fine Arts
Ansonia Clock Co., New York, “Fisher” swinger shelf clock with a spring driven, 8 day, timepiece movement in a gilt and nickel cannister-style case with a bronze finished spelter statue on a black enameled iron base.
The case is in very good condition with some original bronze finish. The movement case is also in very good condition. The original paper dial is in excellent condition. The hands are original. There is some paint loss to the enamelled base.
Sold: $1100 | Date: May 19, 2018 | Source: R. O. Schmitt Fine Arts
Ansonia “Fisher” Swinger Clock
Keywind; marked paper dial; beveled glass; working at this time. 23″
Sold: $1,300 | Date: October 1, 2011 | Source: Tom Harris Auctions
Ansonia Clock Co., New York, NY, “Fisher” ball swinger figural mantel clock, 8 days, time only, spring driven movement in a gilt finished ball case supported by a statue of a fisherman, c1880
the swinger arm has the original gilt finish to ball top and bottom. The arm is complete with a replaced suspension cover. The support arm for the swinger arm is a replacement. The statue has been nicely polished and now lacks finish. Ht 22 1/2″
Sold: $1,100 | Date: October 22, 2016 | Source: R. O. Schmitt Fine Arts
Ansonia Clock Co., New York, NY, “Fisher” older model, 8 days, swinging arm bronze patination spelter figural timepiece, c1880
the black painted iron round base has small chips, but the detailed figure is in very nice condition other than the feathers on his hat are broken off and absent. The signed paper dial has toned and is scuffed at the bottom. The swinging arm has old surfaces with some wear, and there is a stress split in the thin formed brass round head (very common) and small dents around the front bezel. The signed movement ticks but was not tested long term. Overall Ht 20 1/2″
Sold: $1,100 | Date: October 25, 2015 | Source: R. O. Schmitt Fine Arts
Ansonia Clock Co., New York, New York, “Fisher” ball swinger figural mantel clock, 8 days, time only, spring driven movement in a gilt finished ball case supported by a statue of a fisherman, c1880
the swinger arm has the original gilt finish to ball top and bottom. The arm is complete with a replaced suspension cover. The support arm for the swinger arm is a replacement. The statue has been nicely polished and now lacks finish. Ht 22 1/2″
Sold: $1,300 | Date: October 26, 2013 | Source: R. O. Schmitt Fine Arts